The New revolutionary Smart Switch
by Micro Touch

 The Smart Switch is a ~HIDDEN~ switch designed to make the installation and use of aftermarket electronic accessories simple and trouble free! If you install driving lights, fog lights, reverse lights or horns to your Truck, Car, Motorcycle, Quad, Tractor, etc. the Smart Switch can be installed in minutes and operates from one of the switches on your dash or handlebars. It is a very simple four wire hook up triggered by any switch you choose and triggers a 40 amp relay; and is protected by a Standard ATC style fuse, which is included. The installation is simple; here are a couple of examples of uses for the Smart Switch.
 

  Features:
ATC Style Fuse Holders
2-40 Amp Sealed Relays
Potted in Plastic for Waterproofing
Sturdy Plastic Box (3 1/4” x 3 1/4”)
LED Indicators

  Easy to Install in Minutes:
Battery 12 volts
Battery Ground
Switch Wire - (High Beam Wire)
Lights/Horns Output
EVERYTHING should be under your hood!
 

  DRIVING LIGHTS
The most common use for the Smart Switch is to connect the Switch Wire to your High beam Headlight Wire. Connect the Light Wire to you Accessory Driving Lights. Then connect the Red Power (12volt) Wire and the Black Ground Wire to the Battery or suitable 12-volt source.

Here is how it works. The Smart Switch is looking for a quick double click from the high beam switch. The high beam switch will work like usual if used normally.

To activate the Smart Switch simply go from High beams back to Low beams and back to High beams. The Smart Switch will automatically turn on the Accessory Driving Lights. One click back to Low beams will reset the Smart Switch and the accessory lights will shut off.

 HORNS
Simply locate the Horn Wire and connect it to the Smart Switch Switch Wire and connect the Accessory Air Horns or Additional Horns to the Smart Switch Output Wire. Then connect the Red Power (12volt) Wire and the Black Ground Wire to the Battery or suitable 12-volt source.

To operate the Smart Switch Accessory Horns simply hit the horns once and then hit the horns again within 2 seconds and the Accessory Horns will sound.

 Click Here for INSTRUCTION / INSTALLATION SHEET

Watch it work - More INFO